Carrello

Huaptec DS10/15/20 Quad EDWL800

Richiedi un prezzo
Disponibile
DS10-Quad-EDWL800

Huaptec DS10, 15, 20 are high-power cell phone boosters standardized for industrial use in compliance with ETSI and 3GPP 3GPP2. Digital boosters are used either to extend coverage area over remote rural

Key features

  • Networks: LTE 800  MHz + EGSM 900 MHz + DCS 1800 MHz +UMTS 2100 MHz
  • Complies with ETSI and 3GPP 3GPP2 technical standards
  • Coverage: up to 800/ 1500/ 2000 m²
  • Easy installation and maintenance
  • Multi-band and multi-channel
  • MGC and AGC functions
  • Local and remote control software (optional)



  • Panoramica
  • Specifications
  • RECENSIONI
  • Come Installare un Ripetitore

Huaptec DS10, 15, 20 are high-power cell phone boosters standardized for industrial use in compliance with ETSI and 3GPP 3GPP2. Digital boosters are used either to extend coverage area over remote rural or highly urbanized zones and ensure  specific areas of shopping malls, leisure centers, hotels, railway station, subways, etc. The quad band models support four systems in a single repeater –   EGSM 900 MHz, DCS 1800 MHz, WCDMA 2100 MHz and LTE 1800 MHz.

Digital mobile phone repeaters are adjusted accurately to the bandwidth of a cell phone operator. Special digital filters in the repeater provide value of band rejection up to 50 dBc. Thanks to SDR technology, operator’s sub-bands and channels also can be easily changed by the software per client’s request. 

Choose coverage area your need:

  • DS10 – 800 m²
  • DS15 – 1500 m²
  • DS20 – 2000 m²

Huaptec Smart Functions

  1. Multi-band and multi-channel. Each band of DS10, 15, 20 industrial digital boosters support up to 8 sub-bands and up to 12 channels. Multi-band and multi-channel function provides 100% safe signal amplification of the operator’s networks, excluding any possibility of interference with other competitors’ networks.
  2. Noise floor level control. Being channel- and band-selective, the booster provides efficient noise level control. Mobile boosters which amplify the bands of all mobile operators increase the risk of creating much more noise and interference with other operators’ BTSs.
  3. Manual gain control (MGC) MGC helps to regulate both uplink and downlink gain of the booster manually. This function provides signal coverage according the outdoor signal reception conditions and avoids interference with other areas.
  4. Automatic gain/level control (AGC, ALC) Special AGC and ALC circuitsensure automatic adjustment of the mobile booster’s gain depending on the strength of input signals.In caseofself- oscillation the system will alarm through LEDS.
  5. OMT and OMC (Optional). OMT and OMC are software systems, which provide local and remote control of cell phone signal repeaters.OMT is able to monitor 100 boosters, while OMC – 3000 units, and both of themcan display each installed unit. The monitoring systems are available as per customer's inquiry.
  6. Certifications. Huaptec industrial boosters conform to the industrial ETSI and 3GPP 3GPP2 technical standards. The equipment also fully complies with CE and RoHS certifications and is safe and healthy for users.
Specifications
Area di copertura 800 m², 1500 m², 2000 m²
Frequenza 800 MHz (4G/LTE), 900 MHz (GSM/EGSM), 1800 MHz (DCS/LTE), 2100 MHz (3G/WCDMA)
Gamma di frequenze 832~862MHz (Uplink) 791~821MHz (Downlink), 880~915MHz (Uplink) 925~960MHz (Downlink), 1710~1785MHz (Uplink) 1805~1880MHz (Downlink), 1920~1980MHz (Uplink) 2110~2170MHz (Downlink)
Acquisizione massima 60dB (Uplink) - 65dB (Downlink), 65dB (Uplink) - 65dB (Downlink), 65dB (Uplink) - 70dB (Downlink)
Potenza di uscita massima 10dBm (Uplink) - 10dBm (Downlink), 10dBm (Uplink) - 15dBm (Downlink), 15dBm (Uplink) - 20dBm (Downlink)
MGC ( Attenuazione a passo) ≥31 dB / passo 1 dB, dip switch control
Regolarità di acquisizione Tipico ≤5 dB (P-P)
Coefficiente di rumore @ Acquisizione massima del sistema Tipico ≤5 dB
Coefficiente di onda stazionaria Tipico ≤2
Ritardo del gruppo ≤ 8 μs
Alimentazione Ingresso AC 90~264V, Uscita DC 12V/ 3A
Impedenza di entrata e di uscita 50 ohm
Indicazione a LED ALC LED
Monitoraggio locale PC via USB or Ethernet Port
Monitoraggio remoto Via SMS or GPRS
Parametri di controllo Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
Parametri di monitoraggio Gain, Frequency, Repeater ON/OFF, Alarm message, etc.
Segnali di allarme Repeater Failure, DC Failure, ALC Alarm, PLL Failure
Porto di entrata/uscita N-Female
Dimension-industr 482.6*200*90.7 mm
Temperatura di funzionamento -10ºC~+55ºC
Temperatura di conservazione -10ºC~+80ºC
Umidità relativa 5% - 95%
Pressione barometrica 55 kPa -106 kPa
Condizioni ambientali IP40
Scrivi la tua recensione
Stai recensendo:Huaptec DS10/15/20 Quad EDWL800
Il tuo voto

Ripetitore di segnale cellulare HiBoost va in un kit con tutti i componenti necessari per installazione e uso. Riuscirai a montare il sistema da solo dato che la procedura sia facile da eseguire solo in 4 passi:

PASSO 1.. Fissare l'antenna esterna nel punto con la migliore ricezione del segnale fuori della tua casa (ad esempio, sul tetto, fuori della finestra).

PASSO 2. Montare il ripetitore e l'antenna interna all'interno dell'area in cui è necessario migliorare il segnale.

PASSO 3. Collegare il booster alle antenne tramite i cavi.

PASSO 4. Collegare il ripetitore a un alimentatore e godere di una forte ricezione del segnale! Il sistema automaticamente regola i migliori parametri in 3-5 secondi dopo l'accensione.

NOTA!!! Per i modelli ad alta potenza come Hi20-XXX e Hi23-XXX consigliamo vivamente di rivolgersi a installatori professionali.

Please wait...