Stop unbearable hunting for good signal! Cellular signal repeater HiBoost Hi13-EGSM will strengthen reception and provide clear voice conversations in your place. Thanks to intelligent software and high power and gain values, the booster performance is efficient even in the worst covered areas. You can apply the device to your apartment, house, office and any other indoor zone up to 300 sq.m. If you add an optional indoor panel ot omni antenna, its coverage area will extend up to 500 sq.m.
Hi13-EGSM supports extended GSM network standard (EGSM), used by all major cellular operators in Europe. If your carrier supports UMTS/3G 900 MHz, the equipment will bring speedy mobile 3G data into your area as well.
The booster comes small and stylish in a realible metal body equipped with intelligent real-time LCD display.
Buy this cellular signal repeater now and get pleasure with reliable mobile connection!
*Mind that you should have at least 2-3 signal bars outside your house to make the booster provide overall strong signal enhancement. The device’s coverage also depends on building design features.
Displays gain, frequency, and output power to let you keep control over the current working state.
Detects and shows an exact kind of malfunction (ALC or ISO) giving you the cue what is necessary to fix.
Helps to find best point for outdoor antenna mounting basing on the output power value displayed on the screen.
After the booster is on, AGC automatically measures input signal strength and adjusts best system parameters suitable for mobile signal reception conditions in your particular area.
AGC facilitates power control between the base station and a repeater to keep gain at the optimal level. This way HiBoost doesn't overlap mobile network and keeps noise minimized up to zero.
The function lets you thoroughly adjust mobile signal amplification power on your own manually. Recommended for advanced users.
HiBoost Hi13-EGSM model comes in a full kit with all the necessary installation components:
If you need to extend a booster coverage area up to 500 sq.m., you can add an optional kit and replace an indoor whip antenna to an indoor panle or omni antenna. There're 2 kinds of optional kits available:
1) Panel Kit : indoor panel antenna, 50ft (15.2m) Hiboost200 cable
2) Omni Kit: indoor omni ceiling antenna, 50ft (15.2m) Hiboost200 cable
Choose the one that best meets your needs! Omni Kit is ideal if it’s necessary to provide all round coverage, while Panel Kit is suitable if you need to focus the signal into a particular direction.
HiBoost product is officially certified for compliance with the international and European safety, quality and health regulations in the accredited test laboratories. Here’re the certificates we have:
CE - with CE certification, we declare our product’s compliance with the requirements of the European health, safety and environmental protection legislation.
RoHS - RoHS directive proves the limitation upon the usage of hazardous materials in HiBoost product and in its components.
ISO 9001-2008 - HiBoost meets ISO 9001-2008 quality management systems standard that sets out the principles basing on strong customer focus, top management involvement and efficiency, consistent product quality improvement.
Hi13-EGSM Datasheet |
Home&Office Series User Manual |
Coverage Area | 500 m² |
---|---|
Application | Small Home&Office |
Network Type | Calls |
Frequency | 900 MHz (GSM/EGSM) |
Frequency Range | 880~915MHz (Uplink) 925~960MHz (Downlink) |
Number Of Bands | Single Band |
Max. Gain | 60dB (Uplink) - 65dB (Downlink) |
MGC (Step Attenuation) | ≥ 31dB / 1 dB step, dip switch control |
Intelligent AGC (ALC / ISO) | ≥42 dB / ≥42 dB |
Gain Flatness | Typical ≤5 dB (P-P) |
Noise Figure @ Max. System Gain | Typical ≤5 dB |
V.S.W.R | Typical ≤2 |
Group Delay | ≤ 1 μs |
Frequency Stability | ≤0.01 ppm |
Power Supply | Input AC90~264V.50/60Hz,Output DC 5V/3A |
Power Consumption | ≤5W |
Input & Output Impedance | 50 ohm |
LCD Display | Frequency, Gain, Output Power, ALC, ISO, etc. |
Indication LEDs | No |
I /O Port Type | N-Female |
Dimensions | 120*155*34mm / 4.7*6.1*1.3 inch |
Booster Weight | 0.75 Kg |
Booster Weight with KIT | 3.15 kg |
Operating Temperature | -10ºC~+55ºC |
Storage Temperature | -10ºC~+80ºC |
Relative Humidity | 5% - 95% |
Barometric Pressure | 55 kPa -106 kPa |
Environment Conditions | IP40 |
Mobile signal booster comes in a ful kit with all the components for installation and use. The system is plug-and-play and you'll manage to mount it even wiithout professional assistance in 4 easy steps.
STEP 1. Fix the outdoor antenna in the point with best signal reception outside your house (e.g. on the roof, outside the window).
STEP 2. Mount the booster and the indoor antenna inisde the area where you need to improve signal.
STEP 3. Connect antennas and the booster with cables.
STEP 4. Plug in the booster to a power supply and enjoy perfect calls and blazing data download speed! The system self-adjusts best parameters for your area in 30 seconds after the start.
Note!!! For high power models installation such as Hi20-XXX and Hi23-XXX we STRONGLY recommend to address to professional installers.