Shopping Cart

HiBoost F13-3G Mini

Rating:
95% of 100
€164.00 Incl. Tax €195.16
Out of stock
HiBoost f13-3g mini

Key Features

  • Network: UMTS 2100 MHz
  • Coverage: medium areas up to 200 m²
  • Fast 3G mobile data transfer 
  • Full kit with all installation components
  • Compatible with all major EU operators
  • Officially CE- and RoHS-certified
  • 60-Day Money Back Guarantee (Learn more=>>)



  • Overview
  • Specifications
  • Reviews 1
  • How To Install

HiBoost F13-3G Mini repeater is a perfect solution to resolve 3G signal reception problems for good. After you turn the booster on, you will immediately get stable, fast and unbreakable mobile Internet. 3G amplifier HiBoost F13-3G Mini will boost poor signal all over any indoor area up to 200 m², e.g. in a small room, an apartment, a summer house or an office.

The booster runs on UMTS 2100 MHz (3G) – the most widespread 3G frequency in Europe.

Order 3G signal booster F13-3G Mini now and forget about the times when you suffered from poor mobile signal reception!

*Remember that you should have at least 2-3 bars on your phone in a place where you mount the booster outdoor antenna. Otherwise the device won't work efficiently.

**The higher dBm number is, the more powerful signal is spread

HiBoost Smart Functions

LED Indicator

Users can observe current working state with the help of LEDs indicators. They will also signal about any problem occurred.

AGC and MGC

HiBoost F13-3G Mini has Automatic Gain Control (AGC) function that automatically allows balancing the power of signal amplification. It also decreases noise level to zero as well as prevents the booster from any interference with cell towers.

Manual Gain Control, on the other hand, allows regulating system manually.

Safe and Healthy

All European Certifications

All HiBoost models underwent safety and quality tests in German accredited test laboratory and were issued certifications of CE and RoHS compliance. The documents declare that the booster complies with European quality and safety directives.

CE certificateCE – Mandatory conformity marking for products sold within the European Economic Area since 1985. It proves that your product fulfills EU-wide safety, health and environmental protection requirements.

ROHS certificateRoHS – The Restriction of Hazardous Substances Directive 2002/95/EC. It restricts the use of six hazardous substances in electrical and electronic equipment: Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr6+), Polybrominated biphenyls (PBB), Polybrominated diphenyl ether (PBDE).

Longer Phone Battery Life

The repeater guarantees safe signal enhancement and prolongs mobile phone battery life. When the coverage in your area is increased, your mobile device starts receiving stronger signal and spends much less battery.

What Is dBm?

dBm is an abbreviation that stands for power ratio (in decibels) of the measured power. The higher dBm number, the more powerful signal is spread.

Thus, 23 dBm is more powerful than 13 dBm. This means not only larger coverage area, but also signal ability to go through walls, floors, etc.

What Are GSM, DCS, WCDMA and LTE?

GSM is the network for voice signal transmission. Two main frequencies at which mobile operators provide calls in Europe and worldwide are 900 and 1800 MHz. GSM 900 MHz is the main signal standard available both in and out of the city and 1800 MHz usually comes as an additional one predominantly in urban areas.

WCDMA mobile network is used for the transmission of 3G data. In certain counties and regions some carriers also provide 3G service at 900 MHz signal standard.

4G LTE is the mobile network standard for high-speed 4G signal data transfer. There’re 3 main 4G frequencies, at which mobile operators provide 4G data service In Europe- 800, 1800 and 2600 MHz. All of them are more widespread in cities.

F13-3G Mini is compatible with all major mobile operators wordlwide, such as Orange, T-Mobile, Vodafone, Three, etc.

Frequencies diagram

Specifications
Coverage Area 200 m²
Aplication Home, Office
Network Type 3G / UMTS
Frequency 2100 MHz (3G/WCDMA)
Frequency Range 1920~1980MHz (Uplink) 2110~2170MHz (Downlink)
Number Of Bands Single Band
Max. Gain 60dB (Uplink) - 65dB (Downlink)
Max. Output Power 17dBm (Uplink) - 13dBm (Downlink)
MGC (Step Attenuation) ≥ 31dB / 1 dB step, dip switch control
Intelligent AGC (ALC / ISO) ≥51 dB / ≥51dB
Gain Flatness Typical ≤5 dB (P-P)
Noise Figure @ Max. System Gain Typical ≤5 dB
V.S.W.R Typical ≤2
Group Delay ≤ 4.5 μs
Frequency Stability ≤0.01 ppm
Power Supply Input AC100~240V, 50/60 Hz, Output DC12V / 3A
Power Consumption ≤10W
Input & Output Impedance 50 ohm
LCD Display Frequency, Gain, Output Power, ALC, ISO, etc.
Indication LEDs No
I /O Port Type N-Female
Dimensions 120*155*34mm / 4.7*6.1*1.3 inch
Booster Weight 0.75 Kg
Booster Weight with KIT 2.25 kg
Operating Temperature 10ºC~+55ºC
Storage Temperature -10ºC~+80ºC
Relative Humidity 5% - 95%
Barometric Pressure 55 kPa -106 kPa
Environment Conditions IP40
Write Your Own Review
You're reviewing:HiBoost F13-3G Mini
Your Rating

Mobile signal booster comes in a ful kit with all the components for installation and use. The system is plug-and-play and you'll manage to mount it even wiithout professional assistance in 4 easy steps.

STEP 1. Fix the outdoor antenna in the point with best signal reception outside your house (e.g. on the roof, outside the window).

STEP 2. Mount the booster and the indoor antenna inisde the area where you need to improve signal.

STEP 3. Connect antennas and the booster with cables.

STEP 4. Plug in the booster to a power supply and enjoy perfect calls and blazing data download speed! The system self-adjusts best parameters for your area in 30 seconds after the start.

Note!!! For high power models installation such as Hi20-XXX and Hi23-XXX we STRONGLY recommend to address to professional installers.

Please wait...