Huaptec DS10,15,20 is a digital cell phonerepeaterdesigned to enlargemobile signal coverage of base cell towers. These systems are highlycost-effective, allowing mobile operators to economize on new
Huaptec DS10,15,20 is a digital cell phonerepeaterdesigned to enlargemobile signal coverage of base cell towers. These systems are highlycost-effective, allowing mobile operators to economize on new BTSs.Digital repeaters are applicable for large indoor areas, such as tunnels, subways, airports, railway stations, shopping malls, rural zones, etc.
The system is adjusted strictly to the bandwidth used by the mobile provider. At the same time due to SDR technology digital boosters allow users to change the frequency of the preset bands.
Choose coverage area your need:
Coverage Area | 800 m², 1500 m², 2000 m² |
---|---|
Frequency | 800 MHz (4G/LTE), 900 MHz (GSM/EGSM), 1800 MHz (DCS/LTE), 2100 MHz (3G/WCDMA), 2600 MHz (4G/LTE) |
Frequency Range | 832~862MHz (Uplink) 791~821MHz (Downlink), 880~915MHz (Uplink) 925~960MHz (Downlink), 1710~1785MHz (Uplink) 1805~1880MHz (Downlink), 1920~1980MHz (Uplink) 2110~2170MHz (Downlink), 2500~2570MHz (Uplink) 2620~2690MHz (Downlink) |
Max. Gain | 60dB (Uplink) - 65dB (Downlink), 65dB (Uplink) - 65dB (Downlink), 65dB (Uplink) - 70dB (Downlink) |
Max. Output Power | 10dBm (Uplink) - 10dBm (Downlink), 10dBm (Uplink) - 15dBm (Downlink), 15dBm (Uplink) - 20dBm (Downlink) |
MGC (Step Attenuation) | ≥ 31dB / 1 dB step, dip switch control |
Gain Flatness | Typical ≤5 dB (P-P) |
Noise Figure @ Max. System Gain | Typical ≤5 dB |
V.S.W.R | Typical ≤2 |
Group Delay | ≤ 8 μs |
Power Supply | Input AC 90~264V, output DC 12V/ 3A |
Input & Output Impedance | 50 ohm |
Indication LEDs | Alarm LED |
Local Monitoring | PC via USB or Ethernet Port |
Remote Monitoring | Via SMS or GPRS |
Controlled Parameters | Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc. |
Monitoring Parameters | Gain, Frequency, Repeater ON/OFF, Alarm message, etc. |
Alarm Items | Repeater Failure, DC Failure, ALC Alarm, PLL Failure |
I /O Port Type | N-Female |
Dimensions | 220*165*55 mm |
Operating Temperature | -10ºC~+55ºC |
Storage Temperature | -10ºC~+80ºC |
Relative Humidity | 5% - 95% |
Barometric Pressure | 55 kPa -106 kPa |
Environment Conditions | IP40 |
Mobile signal booster comes in a ful kit with all the components for installation and use. The system is plug-and-play and you'll manage to mount it even wiithout professional assistance in 4 easy steps.
STEP 1. Fix the outdoor antenna in the point with best signal reception outside your house (e.g. on the roof, outside the window).
STEP 2. Mount the booster and the indoor antenna inisde the area where you need to improve signal.
STEP 3. Connect antennas and the booster with cables.
STEP 4. Plug in the booster to a power supply and enjoy perfect calls and blazing data download speed! The system self-adjusts best parameters for your area in 30 seconds after the start.
Note!!! For high power models installation such as Hi20-XXX and Hi23-XXX we STRONGLY recommend to address to professional installers.