Huaptec DS23, 27 are industrial high-power cell phone repeaters standardized in conformity with ETSI and 3GPP 3GPP2. The models are quad band and support four networks in a single system.
Huaptec DS23, 27 are industrial high-power cell phone repeaters standardized in conformity with ETSI and 3GPP 3GPP2. The models are quad band and support four networks in a single system – EGSM 900 MHz, DCS/LTE 1800 MHz, WCDMA 2100 MHz and LTE 800 MHz. Digital industrial boosters are mostly used by cell phone providers to expand the coverage area of their BTSs or for specific projects to cover such large areas as airports, railway stations, shopping malls, hotels, hypermarkets, etc.
Digital mobile repeaters adopt advanced technologies and are able to amplify the bandwidth of a certain mobile provider and reject the others (band rejection value is up to 50 dBc). Bandwidth adjustment is made at the manufacture in accordance with client’s needs. In case the operator is eager to change the bandwidth, the repeater allows doing it by the software without a hardware replacement.
Choose coverage area your need:
Coverage Area | 3000 m², 4000 m² |
---|---|
Frequency | 800 MHz (4G/LTE), 900 MHz (GSM/EGSM), 1800 MHz (DCS/LTE), 2100 MHz (3G/WCDMA) |
Frequency Range | 832~862MHz (Uplink) 791~821MHz (Downlink), 880~915MHz (Uplink) 925~960MHz (Downlink), 1710~1785MHz (Uplink) 1805~1880MHz (Downlink), 1920~1980MHz (Uplink) 2110~2170MHz (Downlink) |
Max. Gain | 70dB (Uplink) - 75dB (Downlink), 75dB (Uplink) - 75dB (Downlink) |
Max. Output Power | 15dBm (Uplink) - 23dBm (Downlink), 20dBm (Uplink) - 27dBm (Downlink) |
MGC (Step Attenuation) | ≥ 31dB / 1 dB step, dip switch control |
Gain Flatness | Typical ≤5 dB (P-P) |
Noise Figure @ Max. System Gain | Typical ≤5 dB |
V.S.W.R | Typical ≤2 |
Group Delay | ≤ 8 μs |
Power Supply | Input AC 90~264V, output DC 12V/ 3A |
Input & Output Impedance | 50 ohm |
Indication LEDs | Alarm LED |
Local Monitoring | PC via USB or Ethernet Port |
Remote Monitoring | Via SMS or GPRS |
Controlled Parameters | Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc. |
Monitoring Parameters | Gain, Frequency, Repeater ON/OFF, Alarm message, etc. |
Alarm Items | Repeater Failure, DC Failure, ALC Alarm, PLL Failure |
I /O Port Type | N-Female |
Dimensions | 482.6*250*116.1 mm |
Operating Temperature | -10ºC~+55ºC |
Storage Temperature | -10ºC~+80ºC |
Relative Humidity | 5% - 95% |
Barometric Pressure | 55 kPa -106 kPa |
Environment Conditions | IP40 |
Mobile signal booster comes in a ful kit with all the components for installation and use. The system is plug-and-play and you'll manage to mount it even wiithout professional assistance in 4 easy steps.
STEP 1. Fix the outdoor antenna in the point with best signal reception outside your house (e.g. on the roof, outside the window).
STEP 2. Mount the booster and the indoor antenna inisde the area where you need to improve signal.
STEP 3. Connect antennas and the booster with cables.
STEP 4. Plug in the booster to a power supply and enjoy perfect calls and blazing data download speed! The system self-adjusts best parameters for your area in 30 seconds after the start.
Note!!! For high power models installation such as Hi20-XXX and Hi23-XXX we STRONGLY recommend to address to professional installers.