Shopping Cart

Huaptec DS23/27 Quad EDWL2600

Send Request
In stock
DS223-Quad-EDWL2600

Huaptec DS 23, 27 are digital signal amplifiers for industrial use. The devices are designed to extend coverage area of mobile base towers over rural, residential zones and large indoor objects such

Key features

  • Networks: EGSM 900 MHz + DCS 1800 MHz + WCDMA 2100 MHz + LTE 2600 MHz
  • Complies with ETSI and 3GPP 3GPP2 technical standards
  • Coverage: up to 800/ 1500/ 2000 m²
  • Easy installation and maintenance
  • Multi-band and multi-channel
  • MGC and AGC functions
  • Local and remote control software (optional)



  • Overview
  • Specifications
  • Reviews
  • How To Install

Huaptec DS 23, 27 are digital signal amplifiers for industrial use. The devices are designed to extend coverage area of mobile base towers over rural, residential zones and large indoor objects such as shopping malls, leisure centers, hotels, railway station, subways, etc. DS 23, 27 booster models are quad band and perform at four signal standards at a time – EGSM 900 MHz, DCS 1800 MHz, WCDMA 2100 MHz and LTE 2600 MHz.

Digital mobile signal boosters are adjusted accurately to the requirements of a mobile provider. Each working bandwidth of the amplifier supports 8 sub-bands and 12 channels. No interference with competitor operators is guaranteed, since the devices provide rejection of other bands up to 50 dBc. With SDR technology it’s possible to adjust the digital amplifiers to new bandwidths by the software if necessary.

Choose coverage area your need:

  • DS23 – 3000 m²
  • DS27 – 4000 m²

Huaptec Smart Functions

  1. Multi-band and multi-channel. Each network system in the booster supports up to 8 sub-bands and 12 channels according to the needs of the client. Multi-band and multi-channel functions make digital signal boosters work in better linearity with the base mobile tower and amplify the bandwidths of a certain mobile provider, avoiding interference with competitors. Since each band makes some noise, channel- and band-selectivity also reduce the overall noise level.
  2. Automatic gain/level control (AGC, ALC) Special AGC and ALC circuitsensure automatic adjustment of the mobile booster’s gain depending on the strength of input signals.In caseofself- oscillation the system will alarm through LEDS.
  3. OMT and OMC (Optional). OMT and OMC are software systems, which provide local and remote control of cell phone signal repeaters.OMT is able to monitor 100 boosters, while OMC – 3000 units, and both of themcan display each installed unit. The monitoring systems are available as per customer's inquiry.
  4. Certifications. Huaptec industrial boosters conform to the industrial ETSI and 3GPP 3GPP2 technical standards. The equipment also fully complies with CE and RoHS certifications and is safe and healthy for users.
Specifications
Coverage Area 3000 m², 4000 m²
Frequency 900 MHz (GSM/EGSM), 1800 MHz (DCS/LTE), 2100 MHz (3G/WCDMA), 2600 MHz (4G/LTE)
Frequency Range 880~915MHz (Uplink) 925~960MHz (Downlink), 1710~1785MHz (Uplink) 1805~1880MHz (Downlink), 1920~1980MHz (Uplink) 2110~2170MHz (Downlink), 2500~2570MHz (Uplink) 2620~2690MHz (Downlink)
Max. Gain 70dB (Uplink) - 75dB (Downlink), 75dB (Uplink) - 75dB (Downlink)
Max. Output Power 15dBm (Uplink) - 23dBm (Downlink), 20dBm (Uplink) - 27dBm (Downlink)
MGC (Step Attenuation) ≥ 31dB / 1 dB step, dip switch control
Gain Flatness Typical ≤5 dB (P-P)
Noise Figure @ Max. System Gain Typical ≤5 dB
V.S.W.R Typical ≤2
Group Delay ≤ 8 μs
Power Supply Input AC 90~264V, output DC 12V/ 3A
Input & Output Impedance 50 ohm
Indication LEDs Power indicator, ALC LED: 1) Orange @ ALC 1~5dB, 2) Red @ ALC 20dB~25dB
Local Monitoring PC via USB or Ethernet Port
Remote Monitoring Via SMS or GPRS
Controlled Parameters Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
Monitoring Parameters Gain, Frequency, Repeater ON/OFF, Alarm message, etc.
Alarm Items Repeater Failure, DC Failure, ALC Alarm, PLL Failure
I /O Port Type N-Female
Dimensions 482.6*250*116.1 mm
Operating Temperature 10ºC~+55ºC
Storage Temperature -10ºC~+80ºC
Relative Humidity 5% - 95%
Barometric Pressure 55 kPa -106 kPa
Environment Conditions IP40
Write Your Own Review
You're reviewing:Huaptec DS23/27 Quad EDWL2600
Your Rating

Mobile signal booster comes in a ful kit with all the components for installation and use. The system is plug-and-play and you'll manage to mount it even wiithout professional assistance in 4 easy steps.

STEP 1. Fix the outdoor antenna in the point with best signal reception outside your house (e.g. on the roof, outside the window).

STEP 2. Mount the booster and the indoor antenna inisde the area where you need to improve signal.

STEP 3. Connect antennas and the booster with cables.

STEP 4. Plug in the booster to a power supply and enjoy perfect calls and blazing data download speed! The system self-adjusts best parameters for your area in 30 seconds after the start.

Note!!! For high power models installation such as Hi20-XXX and Hi23-XXX we STRONGLY recommend to address to professional installers.

Please wait...