Shopping Cart

Huaptec DS10/15/20 Quad EDWL800

Send Request
In stock
DS10-Quad-EDWL800

Huaptec DS10, 15, 20 are high-power cell phone boosters standardized for industrial use in compliance with ETSI and 3GPP 3GPP2. Digital boosters are used either to extend coverage area over remote rural

Key features

  • Networks: LTE 800  MHz + EGSM 900 MHz + DCS 1800 MHz +UMTS 2100 MHz
  • Complies with ETSI and 3GPP 3GPP2 technical standards
  • Coverage: up to 800/ 1500/ 2000 m²
  • Easy installation and maintenance
  • Multi-band and multi-channel
  • MGC and AGC functions
  • Local and remote control software (optional)



  • Overview
  • Specifications
  • Reviews
  • How To Install

Huaptec DS10, 15, 20 are high-power cell phone boosters standardized for industrial use in compliance with ETSI and 3GPP 3GPP2. Digital boosters are used either to extend coverage area over remote rural or highly urbanized zones and ensure  specific areas of shopping malls, leisure centers, hotels, railway station, subways, etc. The quad band models support four systems in a single repeater –   EGSM 900 MHz, DCS 1800 MHz, WCDMA 2100 MHz and LTE 1800 MHz.

Digital mobile phone repeaters are adjusted accurately to the bandwidth of a cell phone operator. Special digital filters in the repeater provide value of band rejection up to 50 dBc. Thanks to SDR technology, operator’s sub-bands and channels also can be easily changed by the software per client’s request. 

Choose coverage area your need:

  • DS10 – 800 m²
  • DS15 – 1500 m²
  • DS20 – 2000 m²

Huaptec Smart Functions

  1. Multi-band and multi-channel. Each band of DS10, 15, 20 industrial digital boosters support up to 8 sub-bands and up to 12 channels. Multi-band and multi-channel function provides 100% safe signal amplification of the operator’s networks, excluding any possibility of interference with other competitors’ networks.
  2. Noise floor level control. Being channel- and band-selective, the booster provides efficient noise level control. Mobile boosters which amplify the bands of all mobile operators increase the risk of creating much more noise and interference with other operators’ BTSs.
  3. Manual gain control (MGC) MGC helps to regulate both uplink and downlink gain of the booster manually. This function provides signal coverage according the outdoor signal reception conditions and avoids interference with other areas.
  4. Automatic gain/level control (AGC, ALC) Special AGC and ALC circuitsensure automatic adjustment of the mobile booster’s gain depending on the strength of input signals.In caseofself- oscillation the system will alarm through LEDS.
  5. OMT and OMC (Optional). OMT and OMC are software systems, which provide local and remote control of cell phone signal repeaters.OMT is able to monitor 100 boosters, while OMC – 3000 units, and both of themcan display each installed unit. The monitoring systems are available as per customer's inquiry.
  6. Certifications. Huaptec industrial boosters conform to the industrial ETSI and 3GPP 3GPP2 technical standards. The equipment also fully complies with CE and RoHS certifications and is safe and healthy for users.
Specifications
Coverage Area 800 m², 1500 m², 2000 m²
Frequency 800 MHz (4G/LTE), 900 MHz (GSM/EGSM), 1800 MHz (DCS/LTE), 2100 MHz (3G/WCDMA)
Frequency Range 832~862MHz (Uplink) 791~821MHz (Downlink), 880~915MHz (Uplink) 925~960MHz (Downlink), 1710~1785MHz (Uplink) 1805~1880MHz (Downlink), 1920~1980MHz (Uplink) 2110~2170MHz (Downlink)
Max. Gain 60dB (Uplink) - 65dB (Downlink), 65dB (Uplink) - 65dB (Downlink), 65dB (Uplink) - 70dB (Downlink)
Max. Output Power 10dBm (Uplink) - 10dBm (Downlink), 10dBm (Uplink) - 15dBm (Downlink), 15dBm (Uplink) - 20dBm (Downlink)
MGC (Step Attenuation) ≥ 31dB / 1 dB step, dip switch control
Gain Flatness Typical ≤5 dB (P-P)
Noise Figure @ Max. System Gain Typical ≤5 dB
V.S.W.R Typical ≤2
Group Delay ≤ 8 μs
Power Supply Input AC 90~264V, output DC 12V/ 3A
Input & Output Impedance 50 ohm
Indication LEDs Power indicator, ALC LED: 1) Orange @ ALC 1~5dB, 2) Red @ ALC 20dB~25dB
Local Monitoring PC via USB or Ethernet Port
Remote Monitoring Via SMS or GPRS
Controlled Parameters Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.
Monitoring Parameters Gain, Frequency, Repeater ON/OFF, Alarm message, etc.
Alarm Items Repeater Failure, DC Failure, ALC Alarm, PLL Failure
I /O Port Type N-Female
Dimensions 482.6*200*90.7 mm
Operating Temperature 10ºC~+55ºC
Storage Temperature -10ºC~+80ºC
Relative Humidity 5% - 95%
Barometric Pressure 55 kPa -106 kPa
Environment Conditions IP40
Write Your Own Review
You're reviewing:Huaptec DS10/15/20 Quad EDWL800
Your Rating

Mobile signal booster comes in a ful kit with all the components for installation and use. The system is plug-and-play and you'll manage to mount it even wiithout professional assistance in 4 easy steps.

STEP 1. Fix the outdoor antenna in the point with best signal reception outside your house (e.g. on the roof, outside the window).

STEP 2. Mount the booster and the indoor antenna inisde the area where you need to improve signal.

STEP 3. Connect antennas and the booster with cables.

STEP 4. Plug in the booster to a power supply and enjoy perfect calls and blazing data download speed! The system self-adjusts best parameters for your area in 30 seconds after the start.

Note!!! For high power models installation such as Hi20-XXX and Hi23-XXX we STRONGLY recommend to address to professional installers.

Please wait...