5D-FB is a high power coaxial cable of 10 m (30 ft) length, used to transmit radio frequency (RF) signal. The cable is full band and it supports a frequency range 0-3 GHz. You can use this cable for all HiBoost repeater models.
5D-FB is a high power coaxial cable of 10 m (30 ft) length, used to transmit radio frequency (RF) signal. The cable is full band and it supports a frequency range 0-3 GHz. You can use this cable for all HiBoost repeater models.
NOTE: If you use a cable, which is longer than the one from your kit, the signal booster system will lose power and provide worse mobile signal enhancement. Contact our Professional Technical Managers before you decide to purchase an additional cable.
Inner Conductor Material | Solid Copper or Copper Clad Steel (1.80 mm) | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dielectric Material | Physical Foam Polyethylene (5.00 mm) | ||||||||||||||||||||
First Shield Material | Bonded Aluminum/Polyester/Aluminum tape (5.20 mm) | ||||||||||||||||||||
Outer Conductor Material | Tinned Copper Braid (5.7 mm) | ||||||||||||||||||||
Jacket Material | Black PVC or Polyethylene (7.50 mm) | ||||||||||||||||||||
Capacitance (Pf/M) | 82 | ||||||||||||||||||||
Impedance (ohm) | 50 | ||||||||||||||||||||
Velocity (%) | 82 | ||||||||||||||||||||
Inner Conductor DC Res. (Ω/KM) | 6.8/10.5 | ||||||||||||||||||||
Outer Conductor DC Res. (Ω/KM) | 14.1 | ||||||||||||||||||||
Shielded attenuation(dB) | >80 | ||||||||||||||||||||
Storage Temperature | -25 to +70 | ||||||||||||||||||||
Installation temperature (℃) | -25 to +70 | ||||||||||||||||||||
Cable Working temperature (℃) | - 25 to +70 | ||||||||||||||||||||
Minimum bend radius (mm) | 27 | ||||||||||||||||||||
Attenuation (20℃) |
|
||||||||||||||||||||
VSWR | 5-3000MHz ≤1.20 |
Mobile signal booster comes in a ful kit with all the components for installation and use. The system is plug-and-play and you'll manage to mount it even wiithout professional assistance in 4 easy steps.
STEP 1. Fix the outdoor antenna in the point with best signal reception outside your house (e.g. on the roof, outside the window).
STEP 2. Mount the booster and the indoor antenna inisde the area where you need to improve signal.
STEP 3. Connect antennas and the booster with cables.
STEP 4. Plug in the booster to a power supply and enjoy perfect calls and blazing data download speed! The system self-adjusts best parameters for your area in 30 seconds after the start.
Note!!! For high power models installation such as Hi20-XXX and Hi23-XXX we STRONGLY recommend to address to professional installers.