Shopping Cart

21 m/ 70 ft HiBoost 200 Cable 3D-FB

€94.00 Incl. Tax €111.86
In stock
HiBoost200 Cable 21 m/70 ft

Key Features

  • 21m/ 70ft length
  • Low loss
  • Light, flexible and weatherproof
  • Low transmission delay
  • Minimum attenuation
    • Overview
    • Reviews
    • How To Install

    HiBoost200 is a 70ft/21m low-loss cable with N-Male connectors on both ends. It is used to transmit radio frequency (RF) signal and is compatible with all the 50 ohm amplifiers. The cable’s working frequency range is 0—6GHz.

    PLEASE NOTE: If you use a cable, which is longer than the one from your kit, mind that your booster can lose power and provide worse mobile signal amplification. Contact our Professional Tech Team before buying an additional cable. 

    Technical Specifications

    General Characteristics

    Inner Conductor BC
    Conductor Dia. 1.12 +/-0.02 mm
    Min. Break Strength 453 N
    Insulation Foam P.E
    Insulation Dia. 2.95 +/-0.15 mm
    Color White
    Centricity ≥ 85%
    Adhesion 10 to 100N @ 25 mm
    Shielding AL/P-Foil (Bonded)
    Foil overlap ≥ 120 %
    Outer Conductor TC Wire Braid
    Coverage 90 +/-3%
    Jacket FR-PVC
    Outer Dia. 4.95 +/-0.15mm

    Mechanical Characteristics

    Min. Bending Radius:
    Installation 12.7 mm
    Repeated 50.8 mm
    Max. Pulling Tension 245
    Crush resistance of cable (load of 700N) < 1 %
    Rated Temperature
    Storage/operating temperature -40~+85℃
    Outdoor Installation -40~+85℃

    Electrical Characteristics

    Impedance 50± 2 ohm
    Capacitance 78pF/m
    Velocity ratio 84%
    DCR: Inner Conductor < 17.6 ohm/km
    DCR: Outer Conductor < 16.1 ohm/km
    Jacket Sparker 3000 V RMS
    Dielectric Strength 1000 V DC
    Insulation resistance > 10,000МΩ·km
    Peak Power 2.5 KW
    Shielding Effectiveness >90 dB
    VSWR 30-2500 MHz    <1.20
    Attenuation (at 20 ) dB/100m
    30MHz 5.80
    50 MHz 7.50
    150 MHz 13.10
    220 MHz 15.90
    450 MHz 22.80
    900 MHz 32.60
    1500 MHz 42.40
    1800 MHz 46.60
    2000 MHz 49.30
    2500 MHz 55.40
    5800 MHz 86.50
    Maximum attenuation is 10% higher.
    Write Your Own Review
    You're reviewing:21 m/ 70 ft HiBoost 200 Cable 3D-FB
    Your Rating

    Mobile signal booster comes in a ful kit with all the components for installation and use. The system is plug-and-play and you'll manage to mount it even wiithout professional assistance in 4 easy steps.

    STEP 1. Fix the outdoor antenna in the point with best signal reception outside your house (e.g. on the roof, outside the window).

    STEP 2. Mount the booster and the indoor antenna inisde the area where you need to improve signal.

    STEP 3. Connect antennas and the booster with cables.

    STEP 4. Plug in the booster to a power supply and enjoy perfect calls and blazing data download speed! The system self-adjusts best parameters for your area in 30 seconds after the start.

    Note!!! For high power models installation such as Hi20-XXX and Hi23-XXX we STRONGLY recommend to address to professional installers.

    Please wait...